Step 2: Turn Off The Lights
If you need to adjust your headlights because they are too high or too low, please do the following steps:1) Turn off the headlight switch. 2) Unscrew the cap on top of the headlights. 3) Use a screwdriver to loosen and screw in one side at a time until it is in the desired position. Image source: https://www.homedepot.com/ 4) Put back together by tightening with screwdriver. 5) Turn on headlight switch to test if headlights are adjusted. If not, repeat steps 1-5 until light position is correct (should take less than 5 minutes). 6). Add any necessary silicone sealant around screws when complete (should only be needed for lights that rusted or old). Image source: https://www.dell.com/ NOTE: If you have trouble screwing the cap back on, you can use an "open end" wrench to secure the cap from coming off and flying around. Image source: https://www.croma.com/ ***Also, if your headlights are too high, rotate your car so that it is facing a wall or fence (where you wi